1
/
of
1
CreativeKuts
Transfer Paper - Monstera 2
Transfer Paper - Monstera 2
Regular price
$4.50 AUD
Regular price
Sale price
$4.50 AUD
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
These polymer clay image transfer sheets are made with a magic dissolving paper that will leave a stunning pattern on the surface of your clay slab! Single use. Quantity: 1 sheet. Size: Approximately 140-145mm x 100-102mm. Size may vary slightly depending on style of pattern.
DIRECTIONS FOR USE
1. Roll clay onto tile or suitable work surface and make sure it is securely stuck to the surface.
2. Place the picture side of the transfer sheet down onto the clay. Roll the transfer paper a few times, ensuring all surfaces of the paper are smooth and adhered to the clay.
3. Either spray the clay slab with water or place under a very gentle running tap. Be sure to wet the entire piece of paper, but make sure to be gentle with the water pressure as you may risk washing the whole picture away. Once the paper turns to a jelly like consistency, gently wipe away with your finger to reveal the picture underneath which should be adhered to the surface of the clay.
4. Cut and bake clay as normal.
5. For longer lasting pieces, seal the transferred designs after baking and cooling. I recommend using a varnish that is suitable for use with polymer clay, such as Sculpey Glaze or Cernit Varnish.
DIRECTIONS FOR USE
1. Roll clay onto tile or suitable work surface and make sure it is securely stuck to the surface.
2. Place the picture side of the transfer sheet down onto the clay. Roll the transfer paper a few times, ensuring all surfaces of the paper are smooth and adhered to the clay.
3. Either spray the clay slab with water or place under a very gentle running tap. Be sure to wet the entire piece of paper, but make sure to be gentle with the water pressure as you may risk washing the whole picture away. Once the paper turns to a jelly like consistency, gently wipe away with your finger to reveal the picture underneath which should be adhered to the surface of the clay.
4. Cut and bake clay as normal.
5. For longer lasting pieces, seal the transferred designs after baking and cooling. I recommend using a varnish that is suitable for use with polymer clay, such as Sculpey Glaze or Cernit Varnish.
Share
